A&A Melters
100% electric rubberized asphalt melters in 60, 100 and 200 gallon models. No open or enclosed flame on the roof, and no gas, propane or diesel to carry up.
A&A MELTERS
A-210
A-110
No open or enclosed flame on rooftops, and no gas, propane or diesel needed on the roof. Heavy duty and compact, so it gets onto rooftops easily.
A-60
Our 100% Electric melters come equipped with electric heater elements, electric drive system for the agitator and a factory programmed, easy to use temperature regulator and safety system .
A&A MELTERS
Our electric melters are built to match the speed and efficiency of our propane and diesel fired melters. They are heavy duty and compact enough to get onto rooftops easily.
Computerized controllers manage the heating elements, adjusting power as the temperature rises, for very precise control of heat distribution.
| Model | Capacity | Power (480V 3-phase) | Shipping Weight |
|---|---|---|---|
| A-60 Electric | 60 US gal | 20 amp total | 1,200 lbs |
| A-110 Electric | 100 US gal | 35 amp total | 1,500 lbs |
| A-210 Electric | 200 US gal | 60 amp total | 2,125 lbs |
Figures from each model’s product page. Shipping weight is for the melter only.
A&A MELTERS
Everything runs on electricity, from the heating elements to the agitator.
The material agitator is electrically powered and needs no fuel to run.
Tubular flange electric heaters, controlled by a computerized controller.
A factory programmed regulator, plus a high limit controller that shuts the machine down above the factory preset.
A&A MELTERS
There is no open or enclosed flame on the rooftop, and no gas, propane or diesel needed on the roof. All electrical components are protected with proper breakers and installed by a qualified electrician.
Need a fuel-fired option? See our hot rubber melters, crack sealing machines and mastic melters.
A&A MELTERS
480 volt 3-phase power, from an existing on-site hookup or a rental or portable towable generator set. Contact us for details on power usage and rental options in your area.
Yes. All electrical components are Watlow products, which are UL and CSA approved, and the high limit controllers are Factory Mutual approved.
Yes. We also do repairs on all roofing and waterproofing equipment.
Over 2,500 melters in operation across North America.
A&A MELTERS
Looking at electric melters for sale? Tell us which model you want, and we will take it from there. Prefer to talk it through? Call 1-888-469-4480.
